184
Shutter (Drive) Settings
∫ Cancelling the Auto Bracket
Select [ ] (single picture recording) or [ ] from among the drive modes.
(P178)
∫ Changing the settings for [Single/Burst Settings], [Step] and [Sequence] in Auto
Bracket
1 Select the menu.
2 Press 3/4 to select [Single/Burst Settings], [Step] or [Sequence] and then
press [MENU/SET].
3 Press 3/4 to select the setting and then press [MENU/SET].
•
You can take one picture at a time when set to [ ].
• You can continuously take pictures up to set numbers when set to [ ].
• Exit the menu after it is set.
[MENU] > [Rec]>[Auto Bracket]
Item
Settings
Item
Settings
[Single/Burst
Settings]
[ ] (single)
[Sequence]
[0/`/_]
[] (burst) [`/0/_]
[Step]
[3•1/3] (3 pictures)
[3•2/3] (3 pictures)
[3•1] (3 pictures)
[5•1/3] (5 pictures)
[5•2/3] (5 pictures)
[5•1] (5 pictures)
[7•1/3] (7 pictures)
[7•2/3] (7 pictures)
[7•1] (7 pictures)
To Next Page
Loading...
