192
Functions Customised for Various Subjects and Purposes
2 Press 3
/
4 to select the recording method, and then
press [MENU/SET].
3 Press 3/4 to select [Start] and then press [MENU/SET].
4 Press 3
/
4 to select [New] and then press [MENU/SET].
5 Press the shutter button fully.
•
Up to 9999 frames can be recorded.
6 Move the subject to decide on the composition.
•
Repeat recording in the same way.
• If the camera is turned off during recording, a message for
resuming the recording is displayed when the camera is
turned on. Selecting [Yes] allows you to resume the
recording from the interruption point.
Item Description of settings
[Auto
Shooting]
[ON]
Takes pictures automatically at a set recording interval. When
the shutter button is pressed fully, recording starts.
[OFF]
This is for taking pictures manually, frame by frame.
[Shooting
Interval]
(Only when [Auto Shooting] is set to [ON])
Sets the interval for automatic recording. A value between 1 and
60 seconds can be set in 1 second intervals.
Press 2/1 to select the recording interval (seconds), press 3/4
to set it, and press [MENU/SET].
Recording materials skilfully
•
The recording screen displays up to two pictures taken previously. Use them as
reference for the amount of movement.
• Pressing [(] allows you to check recorded pictures. Unnecessary pictures can be
deleted by pressing [ ]. Pressing [(] again will return you to the recording
screen.
To Next Page
Loading...
