207
Stabiliser, Zoom and Flash
• When a lens based on
the Micro Four Thirds System standard/Four Thirds System standard is in
use, a focal length is set automatically.
• If your lens is based on the Micro Four Thirds System standard/Four Thirds System standard
but does not have a communication function with the camera, set the focal length of the lens.
1 Select the menu.
2 Press 3/4 to select [Focal Length Set] and then press [MENU/SET].
3 Select the focal length of your lens with 2
/
1.
•
A focal length ranging from 8 mm to 1000 mm can be set.
• Set a focal length written on the body of your lens, etc.
• If the focal length setting for your lens is not found, select a
value close to the focal length of your lens.
• If your lens is a zoom lens, select a value according to the
focal length at the time of recording.
4 Press [MENU/SET].
∫ Registering a focal length
1 Perform step 3 in “Setting the focal length of a lens”.
2
Press
4
.
3 Press 2
/
1 to select the focal length to be
overwritten and then press [DISP.].
•
Confirmation screen is displayed. It is executed when [Yes]
is selected.
• Up to 3 focal length settings can be registered.
• Exit the menu after it is set.
∫ Setting a registered focal length
1 On the screen in step 3 of “Setting the focal length of a lens”, press 4.
2 Press 2
/
1 to select the registered focal lengthand then press [MENU/SET].
Setting the focal length of a lens
Preparations: Set the [Shoot w/o Lens] to [ON]. (P23)
[MENU] > [Rec]>[Stabilizer]
To Next Page
Loading...
