266
Wi-Fi/NFC
∫ This unit is compatible with NFC
Using the NFC “Near Field Communication” function, you
can easily transfer data necessary for a Wi-Fi connection
between this camera and the smartphone/tablet.
∫ About the Wi-Fi connection lamp
∫ About the [Wi-Fi] button
∫ What you can do with the [Wi-Fi] button when connected to Wi-Fi
If [Wi-Fi] button is pressed when connected to Wi-Fi, the following operations can be
performed.
¢ This is not displayed when the destination of [Remote Shooting & View], [Playback on TV] or
[Send Images Stored in the Camera] is set to [Printer].
Compatible models
This function can be used with the NFC compatible device with Android (OS version
2.3.3 or higher). (excluding some models)
•
For information on the operation and settings of NFC-compatible smartphones/tablets, refer
to the operating instructions of your device.
A Wi-Fi connection lamp
Lit blue: The Wi-Fi connection is on standby
Blinking blue: Sending/receiving data through the Wi-Fi
connection
[Wi-Fi]/[Fn3] button can be used in two ways, as [Wi-Fi]
or as [Fn3] (function 3). At the time of purchase, it is
initially set to [Wi-Fi].
•
Refer to P47 for details about the function button.
Item Description of settings
[Terminate the Connection]
Terminates the Wi-Fi connection.
[Change the Destination]
Terminates the Wi-Fi connection, and allows you to
select a different Wi-Fi connection.
[Change Settings for Sending
Images]
¢
Refer to P308 for details.
[Register the Current Destination
to Favorite]
Registering the current connection destination or the
connection method, you can easily connect with the
same connection method next time.
[Network Address]
Displays the MAC address and IP address of this unit.
To Next Page
Loading...
