272
Wi-Fi/NFC
Using the NFC “Near Field Communication” function, you can easily transfer data
necessary for a Wi-Fi connection between this camera and the smartphone/tablet.
1 Launch “Image App” on your smartphone/tablet.
2 While [ ] is displayed on the connection
screen of the “Image App”, touch the
smartphone/tablet to [ ] of this unit.
•
It may take time to complete the connection.
• When the smartphone/tablet has connected, an
image of this
camera will be displayed on the
smartphone/tablet.
• If a connection attempt by touching fails, restart the
“Image App”, and then display the screen in step
1
again.
• If a connection is established during single picture
playback, the picture will be transferred to the
smartphone/tablet. (P275)
Connecting to a smartphone/tablet by using the NFC function
∫ Compatible models
This function can be used with the NFC compatible device with Android (OS version
2.3.3 or higher). (excluding some models)
•
For information on the operation and settings of NFC-compatible smartphones/tablets, refer
to the operating instructions of your device.
Preparation:
(On the camera)
•
Set [NFC Operation] to [ON]. (P309)
(On your smartphone/tablet)
•
Check that your smartphone/tablet is a
compatible model.
• Turn on the Wi-Fi function.
• Install the “Image App” in advance. (P269)
To Next Page
Loading...
