283
Wi-Fi/NFC
Click the followings to jump to the beginning of each menu.
•
When sending images on a mobile network, high packet communication fees may be incurred
depending on the details of your contract.
1 Select the menu.
2 Select [Home] or [External].
3 Select [Via Network] or [Direct], and connect. (P301)
•
When [External] is selected, [Direct] cannot be selected.
4 Select a device you want to connect.
•
When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.]. (P308)
5 Take pictures.
•
To change the setting or disconnect, press [Wi-Fi]. (P266)
You cannot change the settings while sending pictures. Wait until sending is complete.
Preparations:
When sending a picture to [Home], set your device to DLNA waiting mode.
•
Read the operating instructions of your device for details.
When sending images to [External], the following are required:
•
Registration to “LUMIX CLUB” (P295)
• Address number and access number acquired by the destination External AV device. (P300)
Sending an image each time a recording is made ([Send Images While
Recording]) P283
Sending selected images ([Send Images Stored in the Camera]) P284
Sending an image each time a recording is made ([Send Images While
Recording])
[Wi-Fi] > [New Connection]>[Send Images While Recording]>[AV device]
To Next Page
Loading...
