369
Others
• Pictures cannot be printed using a printer that does not support PictBridge.
> Set to [PictBridge(PTP)] in [USB Mode]. (P56, 326)
> When using a printer with a Cropping or borderless printing function, cancel this function
before printing. (For details, refer to the operating instructions for the printer.)
> When you order photo studios to print pictures, ask the photo studio if the 16:9 pictures can
be printed.
• Since aspect ratio of a panorama picture differs from normal pictures, it may not always be
possible to print it correctly.
> Please use a printer that supports panorama pictures. (For details, please see the
operating instructions of your printer.)
> We recommend using the “PHOTOfunSTUDIO” software on the CD-ROM (supplied) to
adjust the size of the still picture to the print paper size.
• This is the noise of the Dust Reduction Function working (P372); it is not a malfunction.
• It is a sound of lens movement or aperture operation when this unit is turned on or off, and it is
not a malfunction.
• You may hear a sound from the lens and image in the monitor may suddenly change when the
brightness has changed by zoom operation or moving the camera, but there is no effect on
recording.
The sound is caused by the automatic adjustment of the aperture. This is not a malfunction.
The picture cannot be printed when the camera is connected to a printer.
The ends of the pictures are cut at printing.
The panorama picture is not printing correctly.
Others
The camera makes a noise when this unit is turned on.
There is a sound from lens unit.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
