73
Basic
Displaying/not displaying the histogram
Position can be set by dragging the histogram.
•
A histogram is a graph that displays brightness along the horizontal
axis (black to white) and the number of pixels at each brightness level
on the vertical axis.
It allows you to easily check a picture’s exposure.
A dark
B bright
• When the recorded picture and the histogram do not match each other under the
following conditions, the histogram is displayed in orange.
– When the Manual Exposure Assistance is other than [n0] during Exposure Compensation or
in the Manual Exposure Mode
– When the flash is activated
– When suitable exposure is not achieved with the flash closed
– When the brightness of the screen is not correctly displayed in dark places
• The histogram is an approximation in the Recording Mode.
• The histogram displayed in this camera does not match histograms displayed by picture editing
software used in PCs etc.
Displaying/not displaying the guide lines
•
The guide lines are not displayed in [Panorama Shot] in Scene Guide Mode.
When [ ] is set, the position can be set by dragging [ ] on the
guide lines.
•
When it is difficult to move the guide line on the screen edge by touch
operation, use the cursor button to set the position.
Displaying/not displaying the on-monitor recording information screen
[MENU] > [Custom]>[Histogram]>[ON]/[OFF]
[MENU] > [Custom]>[Guide Line]>[ ]/[ ]/[ ]/[OFF]
[MENU] > [Custom]>[Monitor Info. Disp.]>[ON]/[OFF]
To Next Page
Loading...
