6. Drive/Shutter/Image Stabilizer
146
3
Set the recording settings.
4
Close the menu.
≥Press the shutter button halfway.
5
Start recording.
≥Press the shutter button fully.
0
When [Start Time Set] is set, the camera
will enter into sleep status until the start
time is reached.
0
During recording standby, the camera enters into sleep status when no
operation is performed for a certain period of time.
0
The recording will stop automatically.
[Mode]
Switches between Time Lapse Shot and Stop Motion
Animation.
[Shooting
Interval Setting]
[ON]
Sets the interval before the next
recording takes place.
[OFF]
Takes pictures without leaving
recording intervals.
[Start Time]
[Now]
Starts recording when the shutter
button is pressed fully.
[Start Time Set] Starts recording at the set time.
[Image Count]/
[Shooting
Interval]
Sets the number of pictures and the recording interval to
be taken.
0
[Shooting Interval] is not available when [Shooting
Interval Setting] is set to [OFF].
[Exposure
Leveling]
Adjusts the exposure automatically to prevent large
changes in brightness between adjacent frames.
To Next Page
Loading...
