2. Getting Started
49
You can attach the Leica Camera AG L-Mount standard lens to this
camera.
For information about the lenses that can be used, refer to page 23.
0
When removing the body cap, rotate it while pressing the lens release button A.
B Lens fitting marks
Removing a Lens
0
While pressing the lens release button A, rotate
the lens in the direction of the arrow until it stops
and then remove it.
Attaching a Lens
0
Check that the camera on/off switch is set to [OFF].
0
Change the lens in a location where there is not a lot of dirt and dust. If dirt or
dust gets on the lens, refer to page 517.
0
Change the lens while the lens cap is attached.
To Next Page
Loading...
