15. Wi-Fi/Bluetooth
420
Connecting to a Smartphone (Bluetooth Connection)
Follow a simple connection setup procedure (pairing) to connect to a
smartphone that supports Bluetooth Low Energy.
When pairing is set up, the camera also automatically connects to the
smartphone via Wi-Fi.
0
For the first-time connection, pairing settings are required.
For information about connecting for the second and subsequent times, refer to
page 423.
1
On the smartphone, start up
“LUMIX Sync”.
≥A message regarding device
(camera) registration is displayed.
Select [Next].
0
If you have closed the message, select
[ ], then register the camera using
[Camera registration (pairing)].
2
Check the content in the
displayed guide and select
[Next] until the screen to
register the camera is
displayed.
0
Supported smartphones
Android™: Android 5 or higher with Bluetooth 4.0 or higher
(excluding those that do not support Bluetooth Low Energy)
iOS: iOS 11 or higher
0
Turn on the Bluetooth function on the smartphone beforehand.
LUMIX Sync
To Next Page
Loading...
