9. Flash
232
[Firing Mode]/[Manual Flash Adjust.]
You can select whether to set the flash output automatically or manually.
1
Set the [Firing Mode].
≥ ¨ [ ] ¨ [ ] ¨
[Firing Mode]
2
(When set to [MANUAL])
Select [Manual Flash Adjust.]
and then press or .
0
The settings made here are enabled when some flashes from other
manufacturers are attached.
Set on the flash when a Flash (DMW-FL580L/DMW-FL360L/DMW-FL200L:
optional) is attached.
[TTL] Sets flash output to be set automatically by the camera.
[MANUAL]
Sets the flash output manually.
0
With [TTL], you can record the images you want even
when recording dark scenes where the flash output
tends to become greater.
0
The flash output ([1/1], etc.) is displayed on the flash
icon of the recording screen.
To Next Page
Loading...
