184
7.
Metering/Exposure/ISO
Sensitivity
Type of optical measurement to measure brightness can be changed.
¨ [ ] ¨ [ ] ¨ Select [Metering Mode]
[Metering Mode]
[](Multi-metering)
Method in which the most suitable exposure is
measured by judging the allocation of brightness on
the whole screen.
[](Center-weighted)
Method used to perform measuring which focuses
on the center of the screen.
[](Spot)
Method used to measure the
extremely small part around the
spot-metering target A.
0
When you move the AF area,
the spot metering target also
moves to match.
[](Highlight-weighted)
Method used to perform measuring which focuses
on the highlighted parts of the screen to prevent
overexposure.
This is suitable for theatre photography, etc.
0
The standard value for standard exposure can be adjusted:
[] ¨ [ ] ¨ [Exposure Offset Adjust.] (l 371)
To Next Page
Loading...
