Panasonic Lumix S5

6. Drive/Shutter/Image Stabilizer
179
Image Stabilizer Settings
Set the image stabilizer operation to match the recording situation.
¨ [ ] ¨ [ ] ¨ Select [Image Stabilizer]
[Operation Mode]
Sets the stabilization movement (blur) to match the
recording method (normal, panning). (l 181)
[Body(B.I.S.) /
Lens(O.I.S.)]
[ ] ([Body])
The in-body image stabilizer corrects
for vertical, horizontal, and rotational
shake.
[ ] ([Lens +
Body (Roll)])
The in-lens image stabilizer corrects
for vertical and horizontal shake,
while the in-body image stabilizer
corrects for rotational shake.
0 This can be set when using other manufacturers’ lenses
with an image stabilization function.
[When to Activate]
[ALWAYS]
The image stabilizer is always
operating.
[HALF-SHUTTER]
The image stabilizer operates when
the shutter button is pressed halfway.
[E-Stabilization
(Video)]
Camera shake during video recording is corrected along
the vertical, horizontal, roll, pitch, and yaw axes through the
combined use of the in-lens, in-body, and electronic image
stabilizers. (5-Axis Hybrid Image Stabilizer)
0 The [ ] on the recording screen changes to [ ]
while [E-Stabilization (Video)] is functioning.
0 The angle of view may become narrower if set to [ON].
[Boost I.S. (Video)]
Increases the effectiveness of the image stabilizer during
video recording.
This effect can help provide a stable composition when you
want to perform recording from a fixed perspective. (l 182)