Panasonic Lumix S5

9. Flash
233
3
Press 21 to set the flash
output and then press or
.
0 It can be set within the range of [1/1] (full
flash output) to [1/128] in 1/3 steps.
[Flash Adjust.]
You can adjust the flash output when taking pictures with the flash in TTL
output mode.
1
Select [Flash Adjust.].
≥ ¨ [ ] ¨ [ ] ¨
[Flash Adjust.]
2
Press 21 to adjust the flash
output and then press or
.
0 It can be adjusted within the range of [j3
EV] to [i3 EV] in 1/3 EV steps.
0 [ ] is displayed on the recording screen.
0 For information about adjusting the flash output when recording using a
wireless flash, refer to page 238.
0 [Flash Adjust.] cannot be used when the following are set:
– [Firing Mode]: [MANUAL]
– [Wireless]: [ON]