15. Wi-Fi/Bluetooth
440
[Remote Wakeup]
Even when the camera is turned off, the smartphone can be used to start
the camera and record images, or check the recorded images.
Getting started:
1
Connect to a smartphone using Bluetooth. (l 420)
2
Enable [Remote Wakeup] on the camera.
0
¨ [ ] ¨ [ ] ¨ [Bluetooth] ¨ [Remote Wakeup] ¨ [ON]
3
Set the camera on/off switch to [OFF].
4
On the smartphone, start up “LUMIX Sync”.
Turning On the Camera
Select [Remote shooting] in the “LUMIX Sync” home screen.
0
(iOS devices) When a message to confirm the change of destination is displayed,
select [Join].
0
The camera turns on, and automatically connects using Wi-Fi.
Turning Off the Camera
1
Select [ ] in the “LUMIX Sync” home screen.
2
Select [Turn off the camera].
3
Select [Power OFF].
0
When [Remote Wakeup] has been set, the Bluetooth function continues to
work even if the camera on/off switch is set to [OFF], so the battery will drain.
To Next Page
Loading...
