Panasonic Lumix S5

17. Materials
491
Shutter Remote Control (Optional)
You can connect the Shutter Remote Control
(DMW-RS2: optional) to use the camera as
follows:
– Fully pressing the shutter button without camera shake
– Securing the shutter button during bulb recording and
burst recording
– Start/end the video recording
– Using the functions registered in the video rec. button of
the Shutter Remote Control

Registering Functions to the Video Rec. Button
You can register a favorite function to the video rec. button on a Shutter
Remote Control.
The functions that can be registered are the same as the functions that can
be registered to the Fn buttons for recording
(l 325).
[Video Record] is registered in the default setting.
¨ [ ] ¨ [ ] ¨ Select [Video Rec. Button (Remote)]
0
Register functions using the same operations as [Fn Button Set]. (l 321)
0 When the battery in the Battery Grip is used, [ ] is displayed on the
monitor.
0 You can register functions of your choice to the [Fn] button on the Battery
Grip. (l 321)
The [WB] button, [ISO] button, [ ] button, [AF ON] button, and joystick
each work the same as the buttons and joystick on the camera body.
0 Refer to the operating instructions for the Battery Grip for details.
0 Always use a genuine Panasonic Shutter Remote Control (DMW-RS2:
optional).
0 Refer to the operating instructions for the Shutter Remote Control for details.