15. Wi-Fi/Bluetooth
460
When [New Connection] has been selected
in [Wi-Fi Function] in [Wi-Fi] of the [Setup]
([IN/OUT]) menu, select the connection
method from either [Via Network] or [Direct]
to connect.
On the other hand, when you use [Select a
destination from History] or [Select a
destination from Favorite], the camera connects to the selected device with
the previously-used settings.
[Via Network]
Connect the camera and destination device through the wireless access
point.
Select the method for connecting to
a wireless access point.
Wi-Fi Connections
Settings: [WPS (Push-Button)]/
[WPS (PIN code)]/
[From List] (l 461)
0
After selecting [Via Network] once, the camera will connect to the
previously-used wireless access point.
To change the wireless access point used for connection, press [DISP.] and
change the connection destination.
0
Check the operating instructions and settings of the wireless access point.
To Next Page
Loading...
