15. Wi-Fi/Bluetooth
461
[WPS (PIN code)]
Enter a PIN code into the wireless access point to set up a connection.
1
On the camera screen, select the wireless access point you are
connecting to.
2
Enter the PIN code displayed on the camera screen into the wireless
access point.
3
Press or of the camera.
[From List]
Searches for a wireless access point to use, and connects to this.
1
Select the wireless access point you
are connecting to.
0
Press [DISP.] to run a wireless access point
search again.
0
If no wireless access point is found, refer to
“Connecting by Manual Input” on page 462.
2
(If network authentication is encrypted)
Enter the encryption key.
0
How to enter characters (l 415)
[WPS (Push-Button)]
Press the WPS button on the wireless access
point to set up a connection.
Press the wireless access point WPS button until
it switches to WPS mode.
Example)
0
Confirm the encryption key of the wireless access point.
To Next Page
Loading...
