Panasonic Lumix S5

10. Recording Videos
267
[Zebra Pattern]
Parts that are brighter than the base value are displayed with stripes.
You can also set the base value and the breadth of the range so that the
stripes are displayed on parts that are within the range of brightness you
specify.
¨ [ ] ¨ [ ] ¨ Select [Zebra Pattern]
[ZEBRA1] [ZEBRA2] [ZEBRA1+2]
[ZEBRA1]
Parts that are brighter than the base value are displayed with
[ZEBRA1] stripes.
[ZEBRA2]
Parts that are brighter than the base value are displayed with
[ZEBRA2] stripes.
[ZEBRA1+2] Both [ZEBRA1] and [ZEBRA2] are displayed.
[OFF] —
[SET]
[Zebra 1]
[50%] to [105%]/
[BASE/RANGE]
Sets the base brightness.
[Zebra 2]
[50%] to [105%]/
[BASE/RANGE]