10. Recording Videos
266
[Luminance Spot Meter]
Specify any spot on the subject to measure the luminance over a small
area.
1
Set [Luminance Spot Meter].
≥ ¨ [ ] ¨ [ ] ¨ [Luminance
Spot Meter] ¨ [ON]
2
Select the position where you
want to measure the
luminance.
≥Press 3421 to select and then
press or .
A Luminance value
0
You can also change the position by
dragging the frame on the recording
screen.
0
To return the position back to the center, press [DISP.].
Measurement Range
Measuring is possible in the range j7 % to 109 % (IRE).
0
When [Photo Style] is set to [V-Log], this can be measured with “Stop” units.
(Calculated as “0 Stop”=42 % (IRE))
65%
65%
To Next Page
Loading...
