10. Recording Videos
265
3
Select the position to display.
≥Press 3421 to select and then
press or .
0
You can also move using touch
operations.
0
To return the waveform or vector scope
position back to the center, press [DISP.].
Screen Displays
The range between 0 and 100 shows dotted lines at intervals of 10.
¢ Dotted line
Display example)
0
The waveform displayed on the camera indicates the luminance as values based on
the conversions below:
0 % (IRE): Luminance value 16 (8-bit)
100 % (IRE): Luminance value 235 (8-bit)
0
You can also change the position by dragging on the recording screen.
0
Waveforms cannot be output over HDMI.
(%, IRE (Institute of Radio Engineers))
109
100
50
0
4
To Next Page
Loading...
