Panasonic Lumix S5

15. Wi-Fi/Bluetooth
466
Image Send Settings
Set the size, file format, and other items for sending the image to the
destination device.
1
After Wi-Fi connection, the
send settings confirmation
screen will be displayed, so
press [DISP.].
2
Change the send settings.
Send Settings and Selecting Images
[Size]
Resize the image to send.
[Original]/[Auto]/[Change] ([L], [M], [S], or [VGA])
0 The [Auto] image size changes depending on the
status of the destination device.
(This can be set when the destination is [Web service])
[File Format]
Sets the file format of images to send.
[JPG]/[RAWiJPG]/[RAW]
0 This setting is possible when the destination supports
the sending of RAW images from this camera. (l 445)
[Delete Location Data]
Select whether to delete the location information from
images before sending them.
0 This can be set when the destination is [Cloud Sync.
Service] or [Web service].
0 This operation only deletes the location information
from the images that are set to be sent.
[Cloud Limit]
You can select whether to send images when the cloud
folder runs out of free space.
[ON]: Does not send images.
[OFF]: Deletes images from the oldest ones, then sends
new images.
0 This can be set when the destination is [Cloud Sync.
Service].