Panasonic Lumix S5

15. Wi-Fi/Bluetooth
424

Canceling Pairing
1
Cancel the pairing setting of the camera.
0
¨ [ ] ¨ [ ] ¨ [Bluetooth] ¨ [Bluetooth] ¨ [SET] ¨ [Delete]
2
Select the smartphone for which to cancel the pairing.
Connecting to a Smartphone ([Wi-Fi connection])
Use Wi-Fi to connect the camera and a smartphone.
With default settings, simple connection with smartphones is possible
without entering a password.
You can also use password authentication for enhanced connection
security.
1
Set the camera to Wi-Fi
connection standby status.
≥ ¨ [ ] ¨ [ ] ¨ [Wi-Fi] ¨
[Wi-Fi Function] ¨ [New
Connection] ¨ [Remote Shooting &
View]
≥The SSID A of the camera is
displayed on the screen.
0
You can also perform the same operation by pressing the Fn button assigned
with [Wi-Fi].
For information about the Fn button, refer to page 321.
0 Also cancel the pairing setting on the smartphone.
0 When [Reset] in the [Setup] ([Setting]) menu is used to reset the network
settings, the information for registered devices is deleted.