Panasonic Lumix S5

14. Menu Guide
400
[Setup] menu ¨ [IN/OUT]
[Bluetooth]
[Bluetooth] (l 420)
[Send Image (Smartphone)] (l 447)
[Remote Wakeup] (l 440)
[Returning from Sleep Mode] (l 434)
[Auto Transfer] (l 437)
[Location Logging] (l 439)
[Auto Clock Set] (l 441)
[Wi-Fi network settings]
[Wi-Fi network settings]: Registers the Wi-Fi access point.
Wireless access points used to connect the camera to Wi-Fi
networks will be registered automatically.
[USB]
[USB Mode] `[y][Select on connection]/
[z][PC(Storage)]/
[ ][PC(Tether)]/
[{][PictBridge(PTP)]
This sets the communication method to be used when the
USB connection cable is connected.
[y][Select on connection]: Select this setting to select
the USB communication system when connecting to another
device.
[z][PC(Storage)]: Select this setting to import images to a
connected PC.
[ ][PC(Tether)]: Select this setting to control the camera
from a PC installed with “LUMIX Tether”.
[{][PictBridge(PTP)]: Select this setting when connecting
to a printer that supports PictBridge.
[USB Power Supply] `[ON]/[OFF]
Provides power from the USB connection cable. (l 41)
0 Even if this item is set to [OFF], power will be supplied
when the AC adaptor is connected.