15. Wi-Fi/Bluetooth
438
To Stop the Automatic Transfer of Images
¨ [ ] ¨ [ ] ¨ [Bluetooth] ¨ [Auto Transfer] ¨ Select [OFF]
≥ A confirmation screen is displayed, asking you to terminate the Wi-Fi
connection.
0
If the [Bluetooth] and [Auto Transfer] settings of the camera are [ON], the
camera automatically connects to the smartphone via Wi-Fi and Bluetooth
when you turn on the camera.
Start up the “LUMIX Sync” on the smartphone to connect to the camera.
0
When [Auto Transfer] is set to [ON], [Wi-Fi Function] cannot be used.
0
If the camera is turned off during image transfer, and the file sending is
interrupted, then turn on the camera to restart the sending.
– If the storage status of unsent files changes, then sending of files may no
longer be possible.
– If there are many unsent files, then sending of all files may not be possible.
0
Images recorded with the following functions cannot be transferred
automatically:
– Video recording/[6K/4K PHOTO]/[Post-Focus]
– [HLG Photo] (HLG format pictures)
To Next Page
Loading...
