Panasonic SA-VK480EE - Disassembly of D-Amp P.C.B.

72
• Follow the (Step 1) to (Step 6) of Item 9.4
Step 1 Remove 4 screws at the rear panel.
Step 2 Detach 17P FFC at the connector (CN5050) on D-Amp
P.C .B ..
Step 3 Detach 8P cable at the connector (CN5500) on D-Amp
P.C .B ..
Step 4 Remove 2 screws at D-Amp P.C.B. Inner chassis
assembly.
Step 5 Lift up the D-Amp P.C.B. together with the inner chassis
assembly as arrow shown.
Step 6 Remove 2 screws on D-Amp P.C.B..
Step 7 Lift up D-Amp P.C.B. as arrow shown.