Parker AC15 Series - Compliance; Applicable Standards; European Compliance; CE Marking

DOC-0017-03-EN: AC15 Series - Hardware Installation Manual
DOC-0017-03-EN-B 04.04.2023 83 (125)
11 Compliance
11.1 Applicable Standards
Standard No.
Title / Description
EN 61800-3:2018
Adjustable speed electrical power drive systems
Part 3: EMC requirements and specific test methods.
EN 61800-5-
1:2007+A11:2021
Adjustable speed electrical power drive systems
Part 5-1: Safety requirements – Electrical, thermal and energy.
EN 61800-5-2:2017
Adjustable speed electrical power drive systems
Part 5-2: Safety requirements – Functional.
EN ISO 13849-1:2015
Safety of machinery – Safety-related parts of control systems
Part 1: General principles for design
EN 60204-1:2018
Safety of machinery – Electrical equipment of machines
Part 1: General requirements.
EN 61000-3-
2:2019+A1:2021
Electromagnetic Compatibility (EMC)
Part 3-2: Limits – Limits for harmonic current emissions (equipment input
current up to and including 16A per phase).
EN62061:2005 Annex
E+A2:2015
Safety of machinery
Functional safety of safety related electrical, electronic and programmable
electronic control systems.
IEC 61000-3-
12:2011+AMD1:2021
Electromagnetic compatibility (EMC)
Part 3-12: Limits – Limits for harmonic currents produced by equipment
connected to public low-voltage systems with input currents >16A and '575A
per phase.
BS EN IEC 61000-6-
2:2019
Electromagnetic compatibility (EMC)
Part 6-2: General standards – Immunity for industrial environments.
BS EN IEC 61000-6-
3:2021
Electromagnetic compatibility (EMC)
Part 6-3: General standards - Emission standard for residential, commercial
and light-industrial environments.
BS EN IEC 61000-6-
4:2019
Electromagnetic compatibility (EMC)
Part 6-4: General standards – Emission standard for residential, commercial
and light-industrial environments.
UL61800-5-1
Adjustable speed electrical power drive systems
Part 5-1: Safety requirements – Electrical, thermal and energy. Edition 1
CSA 22.2 No.274
Adjustable speed drives
2
nd
Edition April 2017
NFPA
National Electrical Code, National Fire Protection Agency
Part 70
11.2 European Compliance
CE Marking
The CE marking is placed upon the product by Parker Hannifin Manufacturing to facilitate its free
movement within the European Economic Area (EEA). The CE marking provides a presumption of
conformity to all applicable directives. Harmonized standards are used to demonstrate compliance with the
essential requirements laid down in those relevant directives.
It must be remembered that there is no guarantee that combinations of compliant components will result in
a compliant system. This means that compliance to harmonised standards will have to be demonstrated for
the system as a whole to ensure compliance with the directive.