Particle Measuring Systems LASAIR II 550L Operator's Manual


Rules for Reading TouchRAM ButtonsRules for Reading TouchRAM Buttons
LASAIR II Operator’s ManualLASAIR II Operator’s Manual
PagePage
M-7M-7
•• If the TCP/IP address is different, a message is displayed showing the newIf the TCP/IP address is different, a message is displayed showing the new
TCP/IP address and the new location. The user is allowed to selectTCP/IP address and the new location. The user is allowed to select
OKOK
oror
CancelCancel. See Figure. See Figure M-3, “Dialog Box when M-3, “Dialog Box when TCP/IP address is TCP/IP address is changed,” onchanged,” on
pagepage M-7.M-7.
•• If user selectsIf user selects
CancelCancel
, nothing is loaded., nothing is loaded.
•• If user selectsIf user selects
OKOK
, processing continues as follows:, processing continues as follows:
➢➢
If old data is in the LASAIR II, then If old data is in the LASAIR II, then an error message says:an error message says:
“T“TouchRAM conflict. Data on box ouchRAM conflict. Data on box must be erased before loading nemust be erased before loading neww
TCP/IP address”. TTCP/IP address”. TouchRAM information is not ouchRAM information is not loaded. See Figureloaded. See Figure M-M-
4, “Dialog Box 4, “Dialog Box when TCP/IP address when TCP/IP address cannot be changed,” on cannot be changed,” on pagepage M-8.M-8.
➢➢ If no data is stored in the LASAIR II database, If no data is stored in the LASAIR II database, all old location names inall old location names in
the database will be erased. The the database will be erased. The LASAIR II will then:LASAIR II will then:
➢➢ load the new location name and sampling parametersload the new location name and sampling parameters
➢➢ set the new TCP/IP addressset the new TCP/IP address
➢➢ reboot the box to reboot the box to load the addresses. When LASAIR II load the addresses. When LASAIR II reboots, it isreboots, it is
ready to take a sample.ready to take a sample.
Figure M-3: Dialog Box when TCP/IP address is changedFigure M-3: Dialog Box when TCP/IP address is changed

Particle Measuring Systems LASAIR II 550L Specifications

General

Brand	Particle Measuring Systems
Model	LASAIR II 550L
Category	Measuring Instruments
Language	English