Particle Measuring Systems LASAIR II 550L Operator's Manual


Page Page 2-6 2-6 LASAIR LASAIR II II Operator’s Operator’s ManualManual
Chapter 2: Unpacking and InstallationChapter 2: Unpacking and Installation
55
Fit the open end of the Fit the open end of the 1/2-inch adapter over the instrument’s sample inlet.1/2-inch adapter over the instrument’s sample inlet.
Gently but firmly, press downward on the adapter until it will Gently but firmly, press downward on the adapter until it will not go down annot go down anyy
furtherfurther. The adapter. The adapter’s internal O-ring will hold it in place.’s internal O-ring will hold it in place.
Figure 2-4: Figure 2-4: 350L and 550L 350L and 550L TTubing, Tripod Adaptorubing, Tripod Adaptor, and , and Sample ProbeSample Probe
Figure 2-5: 350L and 550L Assembled Sample Probe end of the TubingFigure 2-5: 350L and 550L Assembled Sample Probe end of the Tubing
Sample Probe Sample Probe -to-T-to-Tubingubing
AdapterAdapter
10000089071000008907
HYTREL PVC TubingHYTREL PVC Tubing
10000093411000009341

Particle Measuring Systems LASAIR II 550L Specifications

General

Brand	Particle Measuring Systems
Model	LASAIR II 550L
Category	Measuring Instruments
Language	English