Patton electronics SmartNode Series - Example 4: Frame Relay Without a Channel-Group

PRI port configuration task list 201
SmartWare Software Configuration Guide 16 • PRI port configuration
protocol eam-wink-start
encapsulation cc-rbs
bind interface pri00_1_8 switch
channel-group group_9_16
timeslots 9-16
encapsulation rbs
rbs
protocol ground-start exchange
encapsulation cc-rbs
bind interface pri00_9_16 switch
channel-group group_17_24
timeslots 17-24
encapsulation rbs
rbs
protocol eam-double-wink-start
encapsulation cc-rbs
bind interface pri00_17_24 switch
port e1t1 0 0
no shutdown
Example 4: Frame Relay without a channel-group
port e1t1 0 0
port-type e1
framing crc4
encapsulation hdlc
hdlc
encapsulation framerelay
framerelay
lmi-type itu
pvc 100
encapsulation rfc1490
bind interface pvc100 router
no shutdown
port e1t1 0 0
no shutdown