Patton electronics SmartNode Series - Check DHCP-Server Configuration and Status; Define the Bootfile (Option 67) for the DHCP-Server; Define the TFTP Server (Option 66) for the DHCP-Server

DHCP-server configuration tasks 298
SmartWare Software Configuration Guide 27 • DHCP configuration
Define the bootfile (Option 67) for the DHCP-server
The DHCP server can define bootfile (DHCP option 67). In contrast to the existing options bootfile and
next-server, these options do not use BOOTP fields but DHCP options.
Mode: profile dhcp-server
Define the TFTP server (Option 66) for the DHCP-server
The DHCP server can define tftp-server (DHCP option 66). In contrast to the existing options bootfile and
next-server, these options do not use BOOTP fields but DHCP options.
Mode: profile dhcp-server
Check DHCP-server configuration and status
This procedure describes how to check the configuration and current status of the DHCP-server
Mode: Any
Example:
node(ctx-ip)[router]#show dhcp-server
The DHCP server is running
Profiles
LAN (active)
Network : 192.168.1.0 255.255.255.0
Include : 192.168.1.32 - 192.168.1.63
Lease Time : 2 days
Default Router : 192.168.1.1
Domain Name Server : 80.254.161.125
: 80.254.161.126
Bound leases
192.168.1.32 (Dufour)
Address : ethernet:00.10.A4.7C.7A.F8
Client Id : 01.00.10.A4.7C.7A.F8
Expires : 2002-12-06T21:18:04
Step Command Purpose
1 [name](pf-dhcps)[profile]#[no] bootfile-
opt67 <bootfile>
Defines bootfile (option 67).
Step Command Purpose
1 [name](pf-dhcps)[profile]#[no] tftp-
server-opt66 <tftp-server>
Defines TFTP server (option 66).
Step Command Purpose
1 node(cfg) #show dhcp-server Displays configuration and status information