SIP profile configuration task list 598
SmartWare Software Configuration Guide 49 • SIP profile configuration
Mapping to a SIP cause
The map cause to-sip command can be used to map a call control Q.931 cause to a SIP cause. All causes are
pre-defined in the system and are provided by the command.
Mode: Profile SIP
Mapping from a SIP redirection reason
The map redir-reason from-sip command can be used to map a specific SIP redirect code to a Q.931 redirect
reason used by the call control. All redirect codes and reasons are pre-defined in the system and are provided by
the command.
Mode: Profile SIP
Mapping to a SIP redirection code
The map redir-reason to-sip command can be used to map a Q.931 redirect reason to a specific SIP redirect
code. All redirect codes and reasons are pre-defined in the system and are provided by the command.
Mode: Profile SIP
Step Command Purpose
1 [name](pf-sip)[name]#map cause to-sip
q931-cause to sip-cause
Maps a specific Q.931 disconnect cause to a
SIP cause code.
Step Command Purpose
1 [name](pf-sip)[name]#map redir-reason
from-sip code to reason
Maps a SIP redirection code to a Q.931 redirec-
tion reason.
Step Command Purpose
1 [name](pf-sip)[name]#map redir-reason
to-sip reason to code
Maps a Q.931 redirect reason to a SIP redirect
code.
To Next Page
Loading...