Patton electronics SmartNode Series - Page 325

PPP configuration task list 325
SmartWare Software Configuration Guide 30 • PPP configuration
Example: Display PPP link information
node(cfg)#show ppp links 4
PPP Link Information:
=====================
Link:
ID: 0
Name: ethernet 0 0 0/pppoe/ppp_green
Protocols: LCP, PAP
LCP:
ID: 0
Name: ethernet 0 0 0/pppoe/ppp_green
State: Opened
Conf-Req send rate: 3000ms
Max. Conf-Req: 10
Term-Req send rate: 3000ms
Max. Term-Req: 2
Echo-Req send rate: 10000ms
Max. Echo-Req: 3
Local ID: 100000020390
Remote ID:
Local configured options:
Magic Number = 0x00000000
MRU = 1492 [68,1492]
ACCM = 0xffffffff
Local acknowledged options:
Remote configured options:
Magic Number = 0xb89d9e6b
MRU = 1492 [68,1492]
ACCM = 0xffffffff
Authentication Protocol = { PAP }
Remote acknowledged options:
MRU = 1492 [68,1492]
Magic Number = 0xb89d9e6b
Authentication Protocol = { PAP }
Remote denied options:
Remote rejected options:
PAP:
ID: 0
Name: ethernet 0 0 0/pppoe/ppp_green
State: Opened
Direction: supplying
Local authentication:
ID: patton
Password: patton
Success:
Remote authentication:
ID:
Password:
Success: Greetings!!
Auth-Req send rate: 3000ms
Max. Auth-Req: 3