Patton electronics SmartNode Series - Page 607

Location Service configuration task list 607
SmartWare Software Configuration Guide 51 • Location Service
Mode: Authentication inbound
Mode: Authentication inbound
Mode: Authentication inbound
Step Command Purpose
1 [node](authin)#authenticate authentica-
tion-service <authentication-service> [user-
name <username>]
or
[node](authin)#authenticate <index>
authentication-service <authentication-ser-
vice> [username <username>]
or
[node](authin)#authenticate before
<index> authentication-service <authentica-
tion-service> [username <username>]
or
[node](authin)#authenticate after <index>
authentication-service <authentication-ser-
vice> [username <username>]
Adds a new authentication entry to the authentica-
tion inbound face. If more than one authentication
entry has to be entered, the order of the list can be
modified by using the index and/or the insert key-
words before and after.
Step Command Purpose
1 [node](authin)#no authenticate [<index>] Removes the authentication entry at the index or
removes all authentication entries if no index is
given.
Step Command Purpose
1 [node](authin)#authenticate none Removes all authentication entries and disables
explicitly authentication inbound.