Location Service configuration task list 609
SmartWare Software Configuration Guide 51 • Location Service
Mode: Registration outbound
Mode: Registration outbound
Mode: Registration outbound
Mode: Registration outbound
Step Command Purpose
1 [node](regout)#proxy <host> [<port>]
[strict-route]
or
[node](regout)#proxy <index> <host>
[<port>] [strict-route]
or
[node](regout)#proxy before <index>
<host>
[<port>
] [strict-route]or
[node](regout)#proxy after <index> <host>
[<port>] [strict-route]
Adds a new proxy entry to the registration out-
bound face. For each proxy configured there is a
route-header added. If more than one proxy entry
has to be entered, the order of the list can be mod-
ified by using the index and/or the insert key-
words before and after.
Step Command Purpose
1 [node](regout)#proxy <index> down <posi-
tions>
or
[node](regout)#proxy <index> up <posi-
tions>
If multiple proxies are configured the entry at the
index can be moved in the proxy list up or down
the number of positions given in the command.
Step Command Purpose
1 [node](regout)#no proxy [<index>] Removes the proxy entry at the index or remove all
proxy entries if no index is given.
Step Command Purpose
1 [node](regout)#proxy none Removes all proxy entries and disables explicitly
the use of a proxy.
To Next Page
Loading...