76180 EM -55/73-
28-8. Default setting
*This setting is initialized camera as condition of product shipment.
The initialized item is as follows.
Menu, Custom function, Language, Date / Time, ISO, WB, Recorded image, Recorded Pixels,
Quality Level
[Required equipment] CF card (for Default setting), AC adaptor (D-AC10)
① Turn the main SW to OFF and then connect the AC adaptor to the camera.
② Insert the CF card (for Default setting) into the camera.
③ Turn the main SW to ON while the CF card cover is opened. The Default setting will start
with blinking the access lamp.
④ After COMPLETE… is appeared, turn the main switch to OFF and remove the CF card
from the camera.
⑤ [Initial Setting] will be displayed on the LCD monitor when the main SW is turned ON.
To Next Page
Loading...
