Pentax K10D - Connecting the Camera to the Printer

111
3
Basic Operations
5 Use the four-way controller
(23) to select [PictBridge].
6 Press the 4 button.
The setting is changed.
7 Press the 3 button.
1 Turn the camera off.
2 Connect the camera and PictBridge compatible printer
using the USB cable supplied with the camera.
The PictBridge logo is displayed on PictBridge compatible printers.
Connecting the Camera to the Printer
NTSC
PC
PictBridge
PC-F
Cancel
Brightness Level
Guide display
Set-up
Video Out
Transfer Mode
Auto Power Off
Folder Name
0
3 sec
MENU
OK
OK