142
4
Function Reference
Choose the part of the screen to use for measuring brightness and
determining exposure. L (Multi-segment metering), M (Center-weighted
metering) or N (Spot metering) mode can be selected. The factory default
setting is L (Multi-segment metering).
Set with the metering mode lever. (p.18)
The scene in the viewfinder is metered in
16 different zones as shown in the
illustration when using the multi-segment
metering. This mode automatically
determines what level of brightness is in
which portion.
Selecting the Metering Method
L
Multi-segment
metering
Segments the screen in 16 parts, meters each portion
and determines the appropriate exposure.
M
Center-
weighted
metering
Measures the entire screen with an emphasis on the
center and determines the exposure.
N
Spot metering
Measures only the center of the screen and determines
exposure.
Using the Multi-Segment Metering
The center-weighted metering mode is automatically set even if you select the
multi-segment metering mode when using a lens other than a DA, D FA, FA J, FA,
F or A lens, or when lens aperture ring is set at other than
s
. (Can only be used if
permission is set in [Using aperture ring] (p.35) in the [
A
Custom Setting] menu.)
To Next Page
Loading...
