Pentax K10D - Setting the File Format

116
3
Basic Operations
1 Use the four-way controller (23) to select [DPOF
AUTOPRINT] on the PictBridge menu.
2 Press the 4 button.
The Print w/DPOF settings screen
appears. Use the four-way controller
(45) to check the number of copies
for each image, whether the date is
imprinted or not, and total number of
copies. Print settings are set with the
Print Service. (p.106)
3 Press the 4 button.
The print settings confirmation screen appears.
Refer to Steps 7 to 11 of “Printing Single Images” (p.113 and 114) for
details on how to change the settings.
4 Press the 4 button on the print settings confirmation
screen.
The images are printed according to the settings.
Press the 3 button to cancel printing.
Disconnect the USB cable from the camera and printer when you have
finished printing.
1 Turn off the camera.
2 Disconnect the USB cable from the camera and printer.
Printing Images Using the DPOF Settings
Disconnecting the USB Cable
1
10
10
Date
D a t e
Copies
C o p i e s
Total
To t a l
1
10
DateCopies
Total
Print
P r i n t
Print
Print w/DPOF settings
P r i n t w /DP O F s e t tin g s
Print w/DPOF settings
MENU
OK