Pentax K10D - Printing All Images

114
3
Basic Operations
10 Press the 4 button.
11 Repeat Steps 8 to 10 to set [Paper Type], [Quality] and
[Border Status].
The print settings change screen appears after each item has been set.
When [Std.] is selected for these print settings, images are printed
according to the printer settings.
[Paper Type] with more Es supports higher quality paper.
[Quality] with more Es indicates higher print quality.
12 Press the 4 button twice.
The image is printed according to the settings.
Press the 3 button to cancel printing.
1 Use the four-way controller
(23) to select [Print All] on the
PictBridge menu.
2 Press the 4 button.
The Print all images screen appears.
Printing All Images
Print One
Print All
DPOF AUTOPRINT
OK
O K
OK
Select printing mode
S e l e c t pri n t i n g mod e
Select printing mode
OK