28
1
Before Using Your Camera
The following information appears in the LCD panel on top of the camera.
LCD Panel
1 Shutter speed (p.150) 6 Auto bracket (p.163)
(blinks when Exposure Bracket and
Extended Bracket are both set)
2 Aperture (p.152)
3 Flash mode (p.71)
b : Built-in flash is ready 7 Flash exposure compensation
(when blinking, flash should
be used or incompatible
lens is being used)
8 EV compensation (p.161)
9 Battery level
10 White balance (p.123)
(Not displayed when set to Auto)
O : White balance correction
>
: Red-eye reduction flash on
3 : Auto discharge
Q: Slow-speed sync 11 ISO warning
4 Drive mode (p.36) 12 1 :RAW capture
9 : Single frame shooting 1P : RAW+JPEG capture
j : Continuous shooting 13 Number of recordable images/
EV compensation value/PC (Pb)
g : Self-Timer shooting
W : Remote control shooting (PC=Personal Computer (mass
storage), Pb=PictBridge)
5 EV bar (p.157)
14 Multi-exposure (p.166)
Press the m button to illuminate the LCD panel. You can set not to illuminate
in [Illuminate LCD panel] in the [A Custom Setting] menu.
2
1
3
5
9
7
8
12
11
6
13104
14
To Next Page
Loading...
