167
4
Function Reference
6
Press the 4 button.
The camera returns to the Capture mode.
7
Shoot.
The created picture is displayed in Instant Review each time the shutter
release button is pressed. Press the i button during Instant Review to
discard pictures created to that point and create again from the first picture.
The picture is saved when the set number of shots has been taken.
You can store the current camera settings and easily retrieve them simply
by setting the mode dial to A.
The following settings can be stored.
Store the settings in [USER] in the [R Set-up] menu.
• If the | button or 3 button is pressed, or the Exposure Bracket is set
during Multi-exposure shooting, the pictures that have already been taken
are saved and Multi-exposure is exited.
• Multi-exposure and Auto Bracket or Extended Bracket cannot be used
together. The mode set afterwards is set.
Storing User Settings
Exposure mode White Balance
Flash mode File Format
EV Compensation JPEG Rec. Pixels
Exposure Bracketing Steps & No. of Frames JPEG Quality
Drive mode Image Tone
Flash Exposure Compensation Saturation
Extended Bracketing Steps & Type Sharpness
Sensitivity Contrast
Auto Sensitivity Adjustment Range
+1.3
-
1.0
1.0x5
AE
±3
10000K
10000K
RAW+
RAW+
G2
A1
G2 A1
Saves current shooting
settings in USER mode
200-1600
+1.3
-
1.0
1.0x5
AE±3
200-1600
10
MENU
Cancel
OK
OK
To Next Page
Loading...
Need help?
General
Weight and Dimensions
