Pentax K10D - Selecting the Focusing Area (AF Point)

132
4
Function Reference
Choose the part of the viewfinder to set focus to. The factory default
setting is S (Auto).
The selected AF point lights red in the viewfinder. (Superimpose AF Area)
Set with the AF point switching dial. (p.18).
Selecting the Focusing Area (AF Point)
S
Auto
The camera selects the optimum AF point even if the
subject is not centered.
j
Select
Sets the focusing area to one of the eleven points in the AF
area.
U
Center Sets the focusing area to the center of the viewfinder.
• AF point is not displayed in the viewfinder when [Off] is selected for
[Superimpose AF Area] in the [A Custom Setting] menu. (p.33)
• The AF point is fixed to the center position regardless of this setting with
lenses other than DA, D FA, FA J, FA or F lenses.