48
2
Getting Started
Inserting/Removing the SD Memory
Card
Captured images are recorded on the SD Memory Card. Make sure the
camera is turned off before inserting or removing the SD Memory Card
(market product).
1
Lift the card cover unlock lever
(1) and turn it towards OPEN
(2).
The card cover opens.
2
Insert the card all the way with
the SD Memory Card label
toward the LCD monitor.
Push the SD Memory Card in once to
remove.
3
Close the card cover.
• Do not remove the SD Memory Card while card access lamp is lit.
• Use this camera to format (initialize) an SD Memory Card that is unused or
has been formatted and used on other cameras or digital devices. Refer to
“Formatting the SD Memory Card” (p.188) for details on formatting.
Be sure to fully close the card cover. The
camera will not turn on if the card cover
is open.
1
2
To Next Page
Loading...
