140
4
Function Reference
You can set the sensitivity to suit the brightness of the surroundings.
The sensitivity can be set to [AUTO] or within a sensitivity range equivalent
to ISO 100 to 1600. The default setting is [AUTO].
Set [Sensitivity] in the Fn menu. (p.36)
Set range to automatically correct sensitivity when Sensitivity is set to
[AUTO]. The sensitivity is automatically corrected in the range of [ISO 100-
400] by default.
Turn the front or rear e-dial to set [Sensitivity] in the Fn menu. (p.33)
Setting the Sensitivity
• [Sensitivity] in the Fn menu is not available when the exposure mode is set
to K (Sensitivity Priority).
• Settings other than [AUTO] are not available in [Sensitivity] when the
exposure mode is set to L (Shutter & Aperture Priority).
• Captured images can show more noise if higher Sensitivity is set.
• You can set whether to lock the ISO sensitivity adjustment to increments of
1 EV or to coordinate it with the EV Steps (p.162) in [Sensitivity Steps] in the
[A Custom Setting] menu.
Setting the Range of Automatic Correction in AUTO
Front e-dial Sets the lower sensitivity limit.
Rear e-dial Sets the upper sensitivity limit.
When the exposure mode is set to a (Hyper-manual), p (Bulb) or M (Flash X-
sync speed), the sensitivity cannot be set to [AUTO].
800
800
1600
1600
400
400
200
200
100
100
AUTO
AUTO
AUTO
AUTO
100-400
100-400
Sensitivity
Sensitivity
OK
OK
OK
To Next Page
Loading...
Need help?
General
Weight and Dimensions
