Pentax K10D - Mode Dial

19
1
Before Using Your Camera
6 Focus mode lever
Switches between autofocus
mode (
k , l ) (p.130) and
manual focus mode (p.136).
7 | button
Saves JPEG and RAW file.
(p.122)
8 K button
Press to pop up the built-in
flash. (p.71)
9 Mode dial
Changes the Exposure mode.
(p.38)
0 Metering mode lever
Changes the Metering mode.
(p.142)
a ] button
Sets Exposure bracket
shooting. (p.163)
b 3 button
Displays the [ A Rec. Mode]
menu (p.31). Next, press the four-
way controller (
5 ) to display
[
Q Playback] menu (p.31),
[
R Set-up] menu (p.32) and
[
A Custom Setting] menu (p.33).
c i button
Press to delete images. (p.100)
d M button
Press to show shooting
information on the LCD
monitor. (p.23)
e Q button
Switches to the Playback
mode. (p.85)
f { button
Press to display the Fn menu.
Press the four-way controller
(2345) to determine the
following operation. (p.36)
g Shake Reduction switch
Turns the Shake Reduction
function on or off. (p.67)
h 4 button
Saves the setting you selected
in the menu.
Press when menu is not
displayed to display the
currently selected sensitivity in
the LCD panel and viewfinder.
i Four-way controller
(2345)
Use this to move cursor or
change items in menus and
Fn menu.
j AF point switching dial
Sets focus area. (p.133)
k = button
Focuses on the target before
metering. (p.130)
l L button
Locks the exposure before
shooting. (p.162)
m Rear e-dial
Sets the aperture and
sensitivity values.
n m button
Turn the front e-dial while
pressing this button to set the
EV Compensation value.
(p.161)