Pentax K10D User Manual

43
2
Getting Started
Using the Battery
Insert the battery into the camera. Use only a D-LI50 battery.
When using the battery for the first time, or when the battery has not been
used in a long time, or when [Battery depleted] appears, recharge the
battery.
1 Connect the AC plug cord to the battery charger.
2 Plug the AC plug cord into the power outlet.
3 Face the 2 mark on the exclusive battery up and insert it
into the battery charger.
The indicator lamp is lit red during charging.
The indicator lamp turns off when the battery is fully charged.
4 When the battery is fully charged, remove the battery from
the battery charger.
Charging the Battery
Battery D-LI50
Indicator lamp
Battery charger D-BC50
AC plug cord
D-CO2

Pentax K10D Specifications

General

Megapixel	10.2 MP
Sensor type	CCD
Maximum image resolution	3872 x 2592 pixels
Interface	USB 2.0
Color depth	3x8, 3x12, 3x22 bit
Digital SLR	Yes
Video capability	No
Camera shutter speed	1/4000 - 30 s
Compatible operating systems	Windows 2000/XP, Mac OS X 10.2+
Filter size	23.5 mm
Focus	TTL
Auto focusing (AF) modes	Centre weighted Auto Focus
Flash modes	Auto
Display diagonal	2.5 \
Display resolution (numeric)	210000 pixels
USB version	2.0
Photo effects	black&white, Sepia
White balance	auto, Cloudy, daylight, flash, Fluorescent, manual, Shade, Tungsten
Camera playback	Slide show
Self-timer delay	2, 12 s
Material	Polycarbonate
Product color	Black
Compatible memory cards	sd
Light metering	Centre-weighted, Spot
Light exposure modes	aperture priority AE, auto, manual, shutter priority AE
Camera shutter type	Electronic

Weight and Dimensions

Depth	101 mm
Width	141.5 mm
Height	70 mm
Weight	710 g