Pentax K10D - Page 167

165
4
Function Reference
You can save pictures with three different white balance, saturation,
sharpness and contrast levels.
Unlike exposure bracketing, three pictures are saved with each shot.
You can set the saving order with [Auto Bracketng order] in the [A Custom
Setting] menu.
1 Select [Extended Bracket] in
the [A Rec. Mode] menu and
press the four-way controller
(5).
The Extended Bracket screen
appears.
2 Press the four-way controller
(5).
3 Use the four-way controller (23) to choose an item.
4 Press the 4 button.
5 Use the four-way controller (3) to select the step and
press the four-way controller (5).
For [White Balance], select from BA±1, BA±2, BA±3, GM±1, GM±2 and
GM±3. The default setting is BA±1.
For [Sharpness], [Saturation] and [Contrast], select from ±1, ±2 and ±3.
The default setting is ±1.
6 Press the 4 button twice.
Shooting in Extended Bracket Mode
Auto Bracketng order
0 ´ – ´ +, – ´ 0 ´ +, + ´ 0 ´ –
Extended Bracket
Off
Bracketng amount
MENU
Extended Bracket
Off
White Balance
Sharpness
Saturation
Contrast
MENU
Cancel
OK
OK