218
5
Appendix
Battery depleted
The batteries are exhausted. Install new
batteries in the camera. (p.43)
Not enough battery
remaining
to clean sensor
Appears during CCD cleaning if the battery level
is insufficient. Replace the battery with a new
one or use an AC adaptor D-AC50 (optional).
(p.47)
Image folder cannot
be created
The maximum folder number (999) and file
number (9999) are being used, and no more
images can be saved. Insert a new SD Memory
Card or format the card. (p.188)
The image is not stored
The image could not be saved because of an SD
Memory Card error.
Settings not stored
The DPOF settings or rotated image could not
be saved because SD Memory Card is full.
Delete unwanted images and perform DPOF
settings or rotation again. (p.100)
RAW images cannot be set DPOF cannot be applied to the RAW images.
RAW images are
not supported
RAW images cannot be processed using the
digital filter.
No image to be filtered
When digital filter is started from [Q Playback]
menu, this message appears if all saved images
are RAW files or images captured with other
cameras.
This image cannot be
filtered
Appears when digital filter is started from Fn
menu for images captured with other cameras.
No DPOF files
No file set with DPOF. Set DPOF and then print.
(p.106)
Printer error
There is an error with the printer and the file
cannot be printed. Fix all the errors and try
printing again.
No paper in the printer
Printer has run out of paper. Put paper in the
printer and print.
Low ink level in the printer
Printer is running out of ink and appears once
this signal is received from the printer. After two
seconds, the printer resumes printing.
No ink in the printer Printer has run out of ink. Replace ink and print.
Paper stuck in the printer
Paper is jammed in the printer. Remove paper
and print.
Data error A data error has occurred during printing.
Error Message Description
To Next Page
Loading...
Need help?
General
Weight and Dimensions
